Setting Stage Lights For Your Church
Making sure that the lighting in your church looks as good as possible is very important. How do you go about setting up stage lighting for a church? It actually isn’t as complicated as you might think if you are willing to dig into the details. Essentially, you need to find a reliable power source for your lighting, determine your desired stage lighting position, set up the fixtures, and then set up the stage lighting controller. Determining the best way to go about things is going to be dependent on your particular needs.
If you want to learn how to set up the stage lighting in the most efficient way possible, then you need to determine what your needs are first. The way your church is set up is going to play a role in how your lights should be positioned. Also, you need to think about what you are setting lights up for. If you are setting up the lights for normal church services, then that will need to go one way, but you may want to have a different setup if you are doing a church play. There is a lot to think about, but it should not be too tough to handle if you take it one step at a time.
Power Is Important
To start off, you should know that power is very important. No matter what kind of stage lighting fixtures you are going to use, they will need to be powered properly. Most of the traditional stage lighting fixtures that churches use will require dimmable power. When you’re using LED intelligent lighting fixtures, this is typically going to involve distributing power through the auditorium at specific points.
Make sure that you are running the right type of power for the light fixtures that you are using. If you need to make it so that your system can be converted from dimmable to non-dimmable power, then this will be possible. To accomplish this, you can make use of dimmer racks. It will allow you to run the power once and have increased flexibility over what you are able to do with those outlets. Sliding a new module into place is not going to be overly difficult, so it may be worthwhile to take the time to do this.
Determining Stage Lighting Positions
Stage lighting positions are going to be the most important aspect of setting up your stage lighting. You want to get the most out of your lighting so that you can make things look great. There are a few different ways that you can go about this. You can have the lights placed in the back of the auditorium, or you can have lights placed above the stage. Either of these options should be easy enough to pull off.
If you want things to be simple, then making use of spotlights in the back is an easy way to pull off stage lighting. These types of lights are great and are easy to operate from the back of an auditorium. They can highlight specific parts of the stage, such as the pulpit or your choir area. If you want to keep things simple, then this is going to be a very good idea for you.
Moving lights can work well when placed towards the back of the auditorium, as well. These will be able to emulate a concert setting and are popular with churches that have modern praise and worship bands. They can be set up to a board and switched on with ease from a church lighting booth in the back of your auditorium. More traditional forms of lighting are usually placed towards the front of the church.
Traditional lights placed above the pulpit and stage area will be easy to set up, as well. You may need to rig the lights to have them hang from the ceiling. Depending on the size of your church, this may not always be practical. Smaller churches may not have as much headroom. In this situation, some standing floor lights will be very appropriate. This is why it was mentioned at the beginning of the article that your answers will really come down to your specific needs.
If you want to take a look at our list of the best stage lights for a church, then you can get everything that you need. You can decide to go with a company that provides lighting for churches regularly or you can purchase standalone lights and put together your own custom system. Either way, you will be getting a good setup, so long as you put the effort into it.
Setting up Fixtures and the Controller
Now you will just need to set up the fixtures and the controller for your lighting system. This is going to involve positioning the lights and wiring them into your church properly. If you do not have a member of the church that is comfortable with performing these tasks, then you may want to call in an electrician. Ensuring that everything is set up properly is important, and you want to be able to do so in the safest fashion possible. If you already have things set up with the fixtures and do not need to worry about installing new fixtures, then it won’t be as much of a worry.
Setting up the controller should not be a difficult task, either. You can buy a simple board and hook all of the lights into it. This will be able to switch the lights on and off so that you can pull everything off how you want to. This will be especially useful if you try to go with the moving lights placed toward the back of the sanctuary. Being able to control the lights with the controller will be simple enough and most churches tend to place the board toward the back of the church in a designated booth.
Sometimes people prefer to set things up on the side of the stage. You can place your light controller board and sound equipment on the side of the stage if you have room. Most churches prefer to keep this area out of sight to keep things as aesthetically pleasing as possible. Try to buy a board that is easy to learn, too, so that you will not have any difficulties moving forward.
Setting up your stage lighting is not going to be as big of a hassle as you likely thought that it would be. It just takes putting some thought into things, and you will be able to get it done very nicely. Your church is going to look great with the new lighting setup that you have chosen. Putting the right amount of effort into it can ensure that the entire congregation will be pleased with the results.
Zach Kincaid. Top 10 Church Lighting System Providers Design. Retrieved 1/25/19 from: https://www.sharefaith.com/blog/2016/05/church-lighting-system-providers-design/