How to Set up the Roland V-1HD Video Switcher

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on email
Email

This article was syndicated from our sister website Church Technology Superstore.

The Roland V-1HD video switcher is a high-tech video and audio switcher that is reasonably priced and is very versatile, especially when you consider its price. One of the many features it provides is that it is super easy to set up, to learn, and to use. In fact, if you need a good video switcher and you’re inexperienced with these devices, not to worry because this is not a huge mixer with hundreds of buttons on it. It has just the right number of buttons that are easy to learn and which will make your life a lot easier once you get used to it. This being said, you can get a jump start on setting up this mixer by following the simple techniques discussed below.

Getting Started

Naturally, the first thing you’ll need to do when you go to set up this mixer is turn on the unit. You’ll have to plug the unit in first, then turn it on, which is easy because the power cord comes with the unit. The Power button is on the rear panel of the switcher, and it automatically shuts itself off if there is no activity within 240 minutes, which saves you electricity and excess wear and tear. The V-1HD mixer has three main menus: the Set-up menu, the Memory menu, and the Audio menu.

If you press and hold the TAP/BPM button for two seconds, the set-up menu will be displayed. There is a MEMORY button that gets you to that particular menu, and the button that is currently selected is always lit in blue. To get to the Audio menu, press the AUDIO button. You can press the MEMORY or AUDIO buttons once more to get out of these menus.

To Set up the Video Input/Output Format

You’ll need to set the input/output format to match the incoming video signal. To do this, just slide the FORMAT switch to the correct position, either by selecting the 1080p, 1080i, or 720p resolution option. The V-1HD mixer’s internal processing is progressive, which means interlaced input video is automatically converted to a progressive signal. The methods of converting this signal include:

  • BOB: This interpolates the top and bottom fields then unites them in a single frame. If your video contains a lot of movement, this is a good option for you.
  • WEAVE: With this option, the top and bottom field are joined in a single frame, and it is a better option for videos that don’t contain a lot of movement.

When you wish to set the conversion method, simply press and hold the TAP/BPM button, go to the Set-up menu, then choose the DE-INTERLACE mode. If you want to change the frame rate, go to the Set-up menu and choose the FRAME RATE button.

To Adjust the Output Video

With this switcher, you can adjust the main output video or preview the output video to match the receiving output from the mixer. To do this, press and hold the TAP/BPM button to get to the Set-up menu, then choose the COLOR BAR OUTPUT button. At this point, you’ll see several options that you can get to and adjust by pressing the Up or Down buttons, including BPM, BPM SYNC, HDCP, OUTPUT CONTRAST, OUTPUT SATURATION, OUTPUT BRIGHTNESS, OUTPUT COLOR SPACE, and OUTPUT DVI-D/HDMI.

You can also use the A/B fader to adjust the main output video or preview the output video. When you’re adjusting the settings to get them where you want them to be, you can’t go more than 10 seconds without making the adjustments. If you go longer than 10 seconds, the settings go back to the original settings and you’ll have to start all over again.

Switching the View Mode of the Preview Output

With the V-1HD preview output, you get three types of view modes. Start by getting to the Set-up menu and use the Up or Down buttons to get to the Preview Out option. Here is where the three options are found, and they include Multi-View, Output, and Preview. Once you’re at the Set-up menu, you can use the keys to choose the option you prefer.

Using Filter Effects

The first option for selecting filter effects is to go to the MEMORY menu and use the Up or Down arrows to get to Effects A or Effects B. You can also use the A/B fader to do the same thing, where you’ll get options such as:

  • NEGATIVE (inverts brightness and color)
  • EMBOSS (adds a bas-relief effect to the video)
  • COLORIZE (adds color to the video)
  • COLORPASS (produces a monochrome video with a specific color remaining)
  • POSTERIZE (changes the gradations in brightness)
  • SILHOUETTE (separates the video into light and dark areas, then makes the dark areas black and the light areas a different color)
  • MONOCOLOR (produces a monochrome video)
  • FINDEDGE (extracts contours)
  • FLIP (flips the video)

After you’re done setting things up properly, simply press the MEMORY button again to get out of the app. When you want to apply these effects, just output the applicable video, press either the Effects A or B button, turn that particular knob so you can adjust the degree of effect applied, then press the Effects A or B button again to turn off that effect.

As you can see, setting up and operating the Roland V-1HD video switcher is, for all practical purposes, self-explanatory. It is super easy to set up, and getting in and out of each of the menus is a breeze. Even the Compositing effects are simple to set up, and it is here that you can adjust or set features such as PiP (picture in picture), split, chroma-key colors, and more.

Conclusion

The Roland V-1HD video and audio mixer is a very versatile mixer, and while not every feature has been described here, it is easy to understand the basics of setting up the switcher so that you can get the professional results you want and deserve. Even small houses of worship that are on a budget can afford this mixer, and it won’t be long before you’ll be operating it just like a pro.

Further Resources On Video Switchers:

  1. Where To Buy Video Switchers
  2. Blackmagic Design ATEM Mini HDMI Live Switcher Review
  3. How to Chroma Key A Blackmagic ATEM
  4. How to Set up Blackmagic ATEM Switchers
  5. Top Reasons to Use a Video Switcher Rather Than Software
  6. Video Switcher Basics
  7. What Is a Video Switcher?
  8. What Does a Video Switcher Do?
  9. Roland V-1HD Review
  10. RGBLink Mini Review
Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on email
Email